通信人家园

标题: 有个问题啊  [查看完整版帖子] [打印本页]

时间:  2006-3-10 17:17
作者: powerteam     标题: 有个问题啊

SFP5100_2(config-ADSL-0/11)#show adsl line-profile ?
  Function: Show ADSL line-profile of line configuration
  Usage   : show adsl line-profile [<index>]
  Options :
            index: Profile index (1-102)
  e.g.    : show adsl line-profile 3

SFP5100_2(config-ADSL-0/11)#show adsl line-profile
[<index>]{1-102}:
  --------  --------      --------      -------  -------  ------  --------
  profile   operating     channel       min down max down min up   max up
  index     mode          mode          rate     rate     rate     rate
                                        (Kbps)   (Kbps)   (Kbps)   (Kbps)
  --------  --------      --------      -------  -------  ------  ---------
  1         All           Interleaved   32       6144     32       640
  2         All           Interleaved   32       1024     32       480
  3         All           Interleaved   32       512      32       480
  4         All           Interleaved   32       4096     32       640
  100       All           Fast          32       6144     32       640
  101       All           Interleaved   32       6144     32       640
  102       All           Interleaved   32       32000    32       3000
  -------------------------------------------------------------------------
  Total: 7

SFP5100_2(config-ADSL-0/11)#   

-----------------------------------------------------------------------------
以上是1台MA5100子框的ADSL速率模板的列表,看到第102号模板
为什么可以创建32000kbps TX 3000kbps RX 模板? 我们根本没有安装ADSL 2+ 的板子
且状态也不是2+ 下 .........
时间:  2006-4-21 08:33
作者: wzhj1213

虽然是沙发,但什么也看不懂啊。
时间:  2006-4-21 15:40
作者: RexInChina

专用于某些设备的配置,不大适合发在这儿
...
时间:  2006-4-22 16:36
作者: 最终幻想

你先看看你那5100的版本,好象513上以上的就可以那样建,这个模板我是建过的,
然后你可以开个端口出来测试下,我测试的结果是最多只能达到下载10M,
所以那个32M我觉得黑假




通信人家园 (https://test.txrjy.com/) Powered by C114